Product successfully added to your shopping cart
There are 0 items in your cart. There is 1 item in your cart.
Categories
Catalog
-
SRAM NX Eagle chain for 12 speeds25,90 € 29,90 €
Find almos all tools, bearings and parts for the maintenance of your ebike with Brose motor at TiendaMTB.com.
Brose There are 39 products.
from 9,95 €Brose ebike motor bearings
Brose ebike motor bearings improved compared to the originals, to repair any Brose S, T or S Mag electric motor. See the photos and read the long description and notes below to see what reference you need.
from 9,95 €
from 59,95 €Samox Chainring for Brose ebike motors
Samox direct mount chainring for Brose ebike motors (both aluminium and magnesium models). Made of aluminium and available in 32T, 34T, 36T and 38T. Narrow-Wide teeth system to avoid chain drop out. Compatible with 9-10-11-12s chains (including Shimano 12s).
from 59,95 €
from 16,90 €Light cable for Bosch or Brose motors
Light cable with the needed connector for Bosch Gen2 or Brose motors. Now you can connect your front or rear light directly to your motor to get energy from the main battery.
from 16,90 €
from 29,95 € 34,95 € -15%TKX chainring for Brose, Yamaha, Shimano, Giant motor ebikes
TKX chainring for ebikes with Brose, Yamaha, Shimano Steps, Giant and other 104BCD motors. With narrow-wide teeth to avoid chain drop. Robust chainring for ebikes. 104BCD. Available in 32, 34 and 36 teeth. Include bolts and nuts.
Compatible with all chains, including Shimano 12s chains.
from 29,95 € 34,95 € -15%Reduced price!
from 194,90 € 199,90 € -3%SpeedBox for Brose, Shimano, Bafang,...
SpeedBox tuning chip enables you to duplicate the speed limit on your electric bike from 25km/h to 50km/h. SpeedBox is available for Brose (including Specialized), Shimano, Bafang,... electric bike motors.
from 194,90 € 199,90 € -3%Reduced price!
24,90 €Lock Ring Tool for Brose chainring spider
Tool to tighten and loosen the chainring spider in Brose engines, like in the Specilized Turbo Levo. With this key you can make the maintenance of the Brose electric motor.
24,90 €Genuine Brose belt kit
Genuine Brose belt repair kit to change a damaged belt. This kit include the original Brose belt, gasket, seals and instructions. The belt is made with the same compound of the new 2020 model, more robust than the original. Please, select the Brose motor model (S-T (Aluminium), or S Mag).
from 89,90 € 109,90 € -19%
69,90 €Brose belt tensioner
Brose belt tensioner for Brose motors. Original Brose part. Remember tighten the belt tensioner to only 0,2Nm (you can use our 0.2Nm torque tool).
69,90 €
167,90 €Brose motor main pulley (preowned)
Brose motor main pulley with the bearing race and sprag bearing (PLB20126 normal plastic cage) mounted. Preowned pulley in good condition, and new bearings. External PLB20124 bearing not included.
167,90 €
from 8,95 €Molykote PG-75 grease for plastic & metal
MOLYKOTE PG-75 is a high quality German manufactured grease. Specifically designed for lubrication of plastics, rubbers and metal, like the gears found in many ebike motors. Suitable for long term lubrication. Select the format 30ml / 50ml / 150ml.
from 8,95 €
895,00 € 945,00 € -6%Brose S motor C972 25km/h
Brand new Brose S ebike motor (code C972...) factory limited to 25km/h. New Brose motor for that cases where is not posible a repair.
NOTE: Original Brose electronics, not include modifications made for some brands (i.e. Specialized,...), so some advanced features of this brands will not work.
895,00 € 945,00 € -6%Reduced price!
from 29,90 €Brose speed sensor
Speed sensor for electric bikes with Brose motor. Includes speed sensor, cable, and connector, not the magnet of the wheel. Original Brose replacement. Wire length 42cm.
from 29,90 €
from 18,90 €Sealing for Brose drive (chainring side)
Gasket for the right cover (chainring side) of Brose C, S or T ebike motors (aluminum ones), or S MAG (Magnesium). With this Brose motor gasket you will be able to reseal the motor after doing maintenance. Price per unit.
Select your Brose motor model.
from 18,90 €
195,90 €Display Brose Allround
The Brose Allround Display for ebikes with Brose motors is practical and distinctive in design. The 1.5-inch color display is easy to read. The display can be installed on the right or left and is therefore the stylish all-in-one solution per excellence.
NOTE: you need the correct wire to connect this display with your Brose motor (not included).
NOTE: Not work with Specialized or BH bikes.
195,90 €
195,90 €Display Brose Remote
The Brose Remote for ebikes with Brose motors is practical and distinctive in design. The information in LEDs is easy to read, robust and spaceless. The display can be installed on the right or left and is therefore the stylish all-in-one solution per excellence.
NOTE: you need the correct wire to connect this display with your Brose motor (not included).
NOTE2: Not work with Specialized bikes.
195,90 €
from 56,90 €FSA Cranks for ebikes with Brose - Specialized motors
This cranks from FSA are 6061T6 cold forged to be highly resistant to fatigue and high impact tensions. ISIS system for Brose motors. Left and right crank have different offset, like in Specialized ebikes (Levo, Kenevo, etc...).
from 56,90 €
from 18,90 €Left gasket for Brose (ECU side)
Gasket for the cover of Brose C, S or T ebike motors (aluminum ones), or the S MAG (Magnesium). With this Brose motor gasket you will be able to reseal the left part of the motor (electronics side) after doing maintenance. Price per unit.
Select the motor model.
from 18,90 €
8,50 €Bearing seal for Brose drive (chainring side)
Seal for the right bearing (chainring side) for all Brose ebike motors. This seal is extremely effective at stopping water and dirt entering the bearing and ultimately the motor.
8,50 €
39,90 €Brose motor wire for HIGO type displays (4+1 pins)
Brose 4+1 pins motor wire to connect HIGO type displays. Compartible to the Marquardt JD3 and to ZEG Bikes from 2018, and the new style Brose All round Display. 1300 mm long.
We have a similar wire but with 5 pins.
39,90 €
22,95 €0,2Nm Torque wrench
Torque wrench calibrated to 0.2Nm of torque. Allows use of 1/4 inch bits with C 6.3 or E 6.3 shank. With magnet for the correct attachment of the tips.
The value of 0.2Nm of torque is fixed, it cannot be adjusted.
22,95 €
129,90 €Brose planetary gear assy (used)
Brose planetary gear assy replacement, that include the 3 nylon gears, central spindle and associated bearings, like in the photo. Valid for both aluminium and magnesium model. Remember use Molykote plastic grease for this plastic gears. Good condition parts extracted from used motor.
The external gear is not included.
129,90 €
from 3,50 €Vaseline Grease
Vaseline grease to lubricate all type of components. Avoids corrosion, and doesn't has resins ans is not acid. Temperature range from -20 to +130ºC.
from 3,50 €
169,90 €Crankshaft for Brose motors
Crankshaft for Brose motors (C, S, T and S-Mag). If the shaft of your Brose motor is already very worn in the area of the needle bearing, it has been bent or damaged for some reason, it is time to change it for a new one.
169,90 €
10,90 €Bosch, Brose and ISIS M15 crank bolts
M15 allen bolts for Bosch Gen2 & Gen4 (Active, Performance, Performance CX), Brose and ISIS cranks. Autoextract system for cranks with 21mm threaded hole. Price per Pair of bolts.
10,90 €
