Catalog
The SRAM GX Eagle™ crankset delivers consistent performance every time out. Featuring SRAM’s X-SYNC™2 tooth profile chainring, the SRAM GX crankset is engineered for complete chain control. Each tooth’s thickness is precisely toleranced and controlled to work seamlessly with the chain’s inner and outer links.
Italy made, from a single piece of aluminium 7075 T6 CNC, the Leonardi Capo Ultra S cranks have a exceptional rigidity-weight ratio to withstand the competition demands. For a single chainring (SRAM type). For DUB bottom brackets. Only 565gr (weight with 32T chainring and spindle).
Chainring and spindle not included.
Shimano left crank with integrated INPEAK power meter. The integrated power meter supports ANT+ and Bluetooth Low Energy wireless communication protocols so is compatible with almost GPS and cyclecomputers. Only adds 12g to the original crank weight. Available for XTR M9100, XT M8100, XT M8000, SLX M7100,...
Tool to remove the spider in Cannondale Hollowgram or Rotor BB30 cranks (REX1, REX2, 3D30, 3D+,...). With this tool you can disassembly the spider to mount Gecko spiderless chainrings or tighten the lockring on your Canondale Hollowgram or Rotor bb30 cranks.
This adapter is needed tu use SRAM GXP cranks in Shimano type bottom brackets. The Shimano axle has 24mm in both sides, but SRAM GXP cranks has 22mm in the left, and 24mm in the right. This adapter is needed only in the left side, and reduce from 24mm to 22mm. Is posible that you need spacers to adjust lateral movement (not included).
2,5mm Alloy spacer to adjust lateral movement in Shimano cranks with 24mm axle, or in the right side of SRAM GXP cranks. Price per unit.
2mm or 2.5mm Alloy spacer to adjust lateral position of the bottom bracket, and the lateral movement of the cranks. 42mm inner diameter for PressFit bottom brackets of 42mm. Price per unit.
Set of 2 protectors of rubber to the ends of the cranks. Avoid marring cranks when sometimes touch the ground or with any stone, mainly in dual suspension mountain bikes.
Aluminium spacers to adjust side movement of the cranks axle. Spacers available in diferent diameters for each crank type: 30mm - BB30 & PF30, 24mm - Shimano & SRAM GXP (right), 22mm SRAM GXP (left). Price per unit.
Tool to remove the spider in Rotor cranks with 24mm axle. With this key you can disassembly the spider on your ROTOR REX3, 3D24,... cranks. For 10 indents lockrings (not 12).
Central bolts for Cannondale Hollowgram cranks and other BB30 cranks. Available in this colors: blue, orange, gold, red, black and silver. Price per pair.
High quality BB30 cranks spindle made in Al 7075 T6. This axle for BB30 bottom brackets is one of the most rigid in the market. This BB30 axle are compatible with all BB30 cranks (Cannondale, SRAM, ...). You only need to select the correct total width of the BB30 spindle (from end to end of the spindle).
1mm Alloy spacer to adjust lateral position of the bottom bracket, and the lateral movement of the cranks. 41mm inner diameter for bottom brackets of 41mm like BB86, BB89.5 and BB92. Price per unit.
Tool to remove the the chainring in the new Shimano 12s cranks (XTR, XT and SLX). With this tool you can change the chainring in your Shiamno cranks. Compatible with:
FC-M9100/FC-M9120/FC-MT900/FC-M8100/FC-M8120/FC-M8130/FC-M7100/FC-M7120/FC-M7130
1mm or 2mm Alloy spacer to adjust lateral position of the bottom bracket. Valid for traditional threaded (BSA) bottom brackets. 35mm inner diameter. Price per unit.
M10, M12 and M15 allen bolts for Bosch and ISIS cranks. Price per Pair of bolts.
For Bosch Motors:
- M12: For Bosch Gen1 (Classic).
- M15: For Bosch Gen2 & Gen4 (Active, Performance, Performance CX), and Brose.
- M10: For Bosch Gen3 (Active Line, Active Plus) (BDU3xx).
This Prowheel cranks are made to be highly resistant to fatigue and high impact tensions. Compatible with ebikes with 24mm spindle Shimano motors. 165mm length.
This cranks are 6061T6 cold forged to be highly resistant to fatigue and high impact tensions. Mini ISIS system for Bosch 3 generation (motors with M10 crank bolts). 170mm.
Cannondale hollowgram lock ring for chainring. Replacement needed if you worn or damaged the original lock ring of your Cannondale hollowgram cranks.
This cranks from FSA are 6061T6 cold forged to be highly resistant to fatigue and high impact tensions. ISIS system for Brose motors. Left and right crank have different offset, like in Specialized ebikes (Levo, Kenevo, etc...).
DUB spindle for use exclusively with Leonardi Capo cranks (only DUB model, not valid for the old BB30 model). Available in 4 different sizes, select the needed width (view details below).
This FSA cranks are made to be highly resistant to fatigue and high impact tensions. Compatible with ebikes with squared spindle like some Yamaha, Panasonic, Bafang.... 170mm length, 5mm offset.
M15 allen bolts for Bosch Gen2 & Gen4 (Active, Performance, Performance CX), Brose and ISIS cranks. Autoextract system for cranks with 21mm threaded hole. Price per Pair of bolts.
The Shimano XT M8100 crankset has a stiff and lightweight design for more aggressive mountain biking. The forged, hollow crank maximizes power transfer while limiting weight. The chainring is not included, you can buy direct chainrings for Shimano 12v that we have in the store.
Length: 175mm.