Replacement of cycling helmet pads valid for almost any helmet. See in the photos the different models of the pads included in each kit and select the most suitable one with the design of your helmet.
XLC Connecting Kit for Hayes disc brake hose. All the pieces you need to mount two ends of the brake hose. Necessary after shortening the hoses or replace them. Includes 6 pieces: 2 pins, 2 olives and 2 nuts.
Headset ahead of 1 1/8 diameter both upper and lower. The XLC HS-A04 is made by Can Creek in steel for longlasting.
Set of 2 disc brake pads BP-H31 XLC Pro for Formula Mega, The One, C1, R1, RR1, RX, RO and T1 disk brakes. Included reusable heatsink, with which the temperature of the pads is reduced by 50%, the quality of braking is optimized, the durability is increased by 100% and pads noise is reduced. Organic pads.
Set of 2 disc brake pads BP-H11 XLC Pro for Shimano XTR M975, M966, M965, XT M775, M765, SLX M665, LX M585, Deore M535, Saint M800 and Hone M601, and Tektro Dash and Parabox disk brakes. Included reusable heatsink that reduce the temperature of the pads by 50%, the quality of braking is optimized, the durability is increased by 100% and pads noise is reduced. Organic pads.
High stem for bicycles with 1 1/8 ahead steerer. The 30° angle and the length of the stem provide a comfortable position and greater control. From the base of the stem to the middle of the handlebar you win 9,5cm. For use with 31.8 mm handlebars and 1 1/8 top tube forks. Black colour.
Hose for Avid hydraulic disc brakes with straight connector. These hydraulic hose offer maximum resistance to the expansion, providing a more powerful braking with less effort. Valid for Avid ELIXIR 5-7-9-R-CR-X0-CR MAG. 2 meters.
Specially reinforced hose for hydraulic disc brakes. These hydraulic hoses offer maximum resistance to the expansion, providing a more powerful braking with less effort. Includes banjo ends. Green color. 3 meters.
Hose for Magura MT4/MT5/MT6/MT7/MT8/MT TRAIL (all MT except MT2 and MT SPORT) hydraulic disc brakes with banjo connector. These hydraulic hose offer maximum resistance to the expansion, providing a more powerful braking with less effort.
Hose for Magura MT2 hydraulic disc brakes with straight connector. These hydraulic hose offer maximum resistance to the expansion, providing a more powerful braking with less effort. Valid for Magura MT2 from 2015.
Specially reinforced with kevlar hose for hydraulic disc brakes. These hoses offer maximum resistance to the expansion, providing a more powerful braking with less effort. Olives and accesories for assembly not included. 1,8m (only one brake). Black.
Kids helmet for boys and girls an 12 ventilation openings.
The GES Jupy kids gloves has short fingers and the upper face is made of very breathable fabric. Thumb finger in towel and resistant and cushioned palm.
The Pokal kids gloves has short fingers and the upper face is made of very breathable fabric. Resistant and cushioned palm.
Tool to tighten and loosen the chainring spider in Shimano engines. Valid for Shimano E8000, E7000 and E6100 ebike motors with a lockring diameter of 57mm or 54mm aprox. With this key you can make the maintenance of the Shimano electric motor.
XLC Connecting Kit for Magura MT disc brake hose. All the pieces you need to mount two ends of the brake hose. Necessary after shortening the hoses or replace them. Includes 6 pieces: 2 pins, 2 olives and 2 nuts.
Set of 4 disc brake pads (one brake) for bicycles with Magura MT5 or MT7 disk brakes.
Select the pad compound: Organic (semimetallic) or sintered brake pads.
Set of 4 Galfer disc brake pads (one brake) for bicycles with Magura MT5 or MT7 disk brakes.
Select the Galfer pad compound (view description below).
Specially reinforced braided hose for hydraulic disc brakes. These metal hoses offer maximum resistance to the expansion, providing a more powerful braking with less effort. Includes the more common olives and accesories for assembly.
Specially reinforced braided hose for hydraulic disc brakes. These metal hoses offer maximum resistance to the expansion, providing a more powerful braking with less effort. Silver color. 3 meters.
Do not includes olives and accesories for assembly.
Pump to inflate up to 7bar. Button to change the pump between high volume of air or high pressure. Double head for thin and fat valve (presta and schrader or motorcycle). The pump body, stem and lever in aluminum.
The XLC PU-M02 pump has dual head screw to avoid the typical difficulties of pumps with lever. The hose allows us to inflate in a position most comfortable without exerting force on the valve. Completely made in aluminium, is only 21cm. Valid both for presta and schrader valve.
The XLC MTB shoes CB-M05 provide the optimal price-performance ratio with the upper material combination of leather and poliurethane and breathable supportive mesh inserts and the extra-stiff nylon sole. For a comfortable fit use 3 Velcro fasteners. The generous profiling, including the screw-PU cleats guarantees a secure footing in running sections. Black and red color. Compatible with SPD.
The XLC MTB shoes CB-M06 black provide the optimal price-performance ratio with the upper material combination of leather, PVC and breathable supportive mesh inserts and the extra-stiff nylon sole. For a comfortable fit use 3 Velcro fasteners. In addition, the generous profiling, including the screw-PU cleats guarantees a secure footing in running sections. Black color.