Special Miranda chainring for bicycles with Bosch 2nd generation electric motor that need an offset chainring, for example, most boost bikes. One piece chainring with inner chainguard. Available with 8,65mm offset.
Bosch Kiox300 (from 2022) screen protector made of transparent rubber (TPU). It protects all the top and lateral parts of the Bosch Kiox300 screen against scratches, dirt, rain,... allowing the normal use of the display and the buttons.
Bosch LED Remote remote control protector made of transparent rubber (TPU). It protects all the top and lateral parts of the Bosch control unit against scratches, dirt, rain,... allowing the normal use of the buttons.
Bearing race for belt pulley sprag bearing in Brose C, T, TF, S & S-Mag ebike motors. Price per unit.
This is a solid stainless steel press tool designed to complete 4 of the more awkward press jobs that are encountered when overhauling a Brose motor C, T, S & S-Mag. View below an extended description.
Brose motor wire to connect HIGO type displays. Compartible to the Marquardt JD3 and to ZEG Bikes from 2018, and the new style Brose All round Display. 1300 mm long.
The motor conector has 5 pins with the 5 wires connected. We have other version with the motor conector with 4 pins & wires conected, and an independent wire (4+1).
The Brose Marquardt Display for ebikes with Brose motors is practical and distinctive in design. The 1.5-inch color display is easy to read. The display can be installed on the right or left and is therefore the stylish all-in-one solution per excellence.
NOTE: you need the correct wire to connect this display with your Brose motor (not included).
NOTE: Not work with Specialized or BH bikes.
Bafang M500/M420 lock ring for chainring. Replacement needed if you worn or damaged the original lock ring of your Bafang M500/M420 ebike electric motor.
Brose lock ring for chainring. Replacement needed if you worn or damaged the original lock ring of your Brose ebike electric motor.
Bafang M420 motor wire to connect display. 5 pins and triangular connector, Can-Bus (view photos of the connectors). 1200 mm long.
Bafang M410, M420, M500, M510, M600, M560, M800 y M820 motor wire to connect display. From 8 pins to 5+3 pins and triangular connector (view photos of the connectors). CAN-Bus type.
Bafang M420 white plastic gear assembly for ebike motors. Includes the white nylon gear, the center steel spindle and the bearings, all ready to be mounted.
With this plug you can seal the unused ports that you do not use in your Brose motor bike to avoid getting dirty or damaged. Price per unit.
Bearings kits, or individual bearings, for Yamaha PW-ST, PW-TE, PW-CE and equivalent Giant SyncDrive Sport ebike motors. Contains the needed bearings to make the maintenance to the main bearings of your Yahama ebike motor. Include 2 or 6 bearings, 1 seal and 2 o-rings.
NOTE: kit for Yamaha motors with squared spindle (not ISIS). For ISIS type spindle go to Yamaha PW-X or X2.
Alignment tool for Bosch Gen 4 (BDU4XX) drive gear fitment. You need to use this tool to align the drive gear and set the bearing sprags, so that you can refit the gear onto the freewheel sleeve of the Bosch Gen 4 motor.
X-ring seals to increase protection of Brose motors. Fit an external X-ring seal each side of the crankshaft to further stop the chance of any water ingress into the Brose motor. Price per pair of seals.
Velox's E-bike Silicone Grease is insoluble in water and is ideal for protection against stream and toxic water environments. It's perfect for E-bikes because it insulates against electricity (dielectric grease) and allows lubrication in all climate conditions and over a range of temperatures between -50c and 220c.
Magnet for for 6 bolt disc, usually used in ebikes for the speed sensor.
Charger for ebikes with Bosch motor from 1st generation to 4th generation (Classic, Active, Performance y Performance CX). 3 options depending the spped of charge: 2A (slower), 4A (standard), and 6A (faster).
e*Thirteen direct mount chainring for Shimano EP8 / E8000 / E7000 ebike motors. Made of aluminium and available in 32T and 34T. Narrow-Wide teeth system to avoid chain drop out.
e*Thirteen direct mount chainring for Fazua ebike motors. Made of aluminium and available in 32T and 34T. Narrow-Wide teeth system to avoid chain drop out.
WolfTooth direct mount chainring for TQ ebike motors (like Trek ebikes). Made of aluminium and available in 32T and 34T. Narrow-Wide teeth system to avoid chain drop out.
There is a specific version for Shimano 12s chains, so select if you use a Shimano 12s chain or not.
The BTE80 is an adapter to charge directly Shimano batteries outside of the ebike. You can use your charger with this adapter and connect it to the battery directly.
Seal for the inner needle bearing of the crankshaft of the Brose motor. This seal help to protect your motor from water ingress. To install it you need to open the motor and extract the needle bearing. The seal is fitted before the bearing with the lip facing outwards.