Catalog
With this bearings for BB30 cranks you can use your BB30 cranks in frames with BB92, BB89.5 or BB86 bottom brackets. Maximun quality bearings with two lines of balls in each side for more durability.
1mm Alloy spacer to adjust lateral position of the bottom bracket, and the lateral movement of the cranks. 41mm inner diameter for bottom brackets of 41mm like BB86, BB89.5 and BB92. Price per unit.
Wave washer for the axle of the cranks to adjust the lateral movement. Select the internal diameter of the wave washer. It coul be 24mm (for Shimano or SRAM GXP) or 30mm (for BB30, PF30,...).
Sumart bottom bracket to use BB386 cranks with BB30 axle in threaded BSA 68mm or 73mm frames. Due to the increased with is posible that you need to reduce spacers or buy a wider BB30 axle. This BB30-BSA bottom bracket use sealed bearings.
BB30 Bottom bracket shield and wave washer assembly kit. The kit includes two BB30 shields and one wave washer.
BB30 y PF30 adjuster ring. Is used in the axle of the bottom bracket to avoid lateral movement between the crank and the bearing in BB30 and PressFit 30 frames.
11.6415.001.000
Bottom bracket Sumart for frames with PressFit30 (PF30 46mm) bottom bracket, and BB30 or BB386 cranks. Sealed bearings of great quality and aluminum cups to have the best performance. For 68mm, 73mm and 83mm bottom bracket shells.
2,5mm Alloy spacer to adjust lateral movement in Shimano cranks with 24mm axle, or in the right side of SRAM GXP cranks. Price per unit.
Tripeak bottom bracket to use Shimano cranks with BB86/92 frames. Ceramic bearings for the best performance. Thread Fit system for easy installation.
Aluminium spacers to adjust side movement of the cranks axle. Spacers available in diferent diameters for each crank type: 30mm - BB30 & PF30, 24mm - Shimano & SRAM GXP (right), 22mm SRAM GXP (left). Price per unit.
SRAM DUB bottom bracket dust cover / protectors. This plastic caps used over the bearings sometimes break an need to be replaced. Price per pair.
NOTE: Not compatible with SRAM original spacers. Need flat spacers.
Shimano bottom bracket dust cover / protectors. This plastic caps used over the bearings sometimes break an need to be replaced. Valid too for other bottom brackets for 24mm spindle that use this tipe of dust protectors. Price per pair.
Tripeak ceramic bottom bracket to use SRAM DUB cranks with Pressfit BB86/92 frames (41mm diameter). Ceramic bearings for the best performance.
SRAM DUB Bottom Bracket Spacer Kit for cranks with 29mm spindle. This DUB spacers have the needed step that is inserted in the SRAM DUB bottom brackets. Included 15 spacers of different sizes, from 2.5mm to 10.5mm.
Bottom bracket T47 Tripeak for frames with T47 bottom bracket (threaded 47x68/73mm), to use Shimano type cranks (24mm spindle). Sealed bearings of great quality and aluminum cups to have the best performance without noise.
DUB adjuster ring. Is used in the axle of the bottom bracket to avoid lateral movement between the crank and the bearing in DUB cranks.
Trek BB90/BB95 bottom bracket steel bearings with caps. For use with Shimano cranks (24mm spindle). Made by Tripeak with high quality bearings. Price per pair of bearings and caps.
Cups bearings for BSA threaded bottom brackets 100% compatible with Shimano. Compatible with all the Hollowtech II from Shimano or Race Face X-Type cranks (24mm spindle). This TKX threaded bottom brackets is compatible with frames with bottom bracket with of 68mm or 73 mm. Included 3 spacers.
Tripeak ceramic bottom bracket to use BB30 cranks (30mm spindle) with Pressfit30 (PF30) frames. Ceramic bearings for the best performance. Easy and secure TwistFit installation system (tool included).
Trek BB90/BB95 bottom bracket hybrid ceramic bearings with caps. For use with Shimano cranks (24mm spindle). Made by Tripeak with high quality ceramic balls. "Snug fit" with plastic cover to adapt better to the bottom bracket form. Price per pair of bearings and caps.
Shimano Dura Ace BB92-41B cups bearings for PressFit Shimano bottom brackets. Compatible with all the Hollowtech II cranks from Shimano or Race Face X-Type cranks. For frames with bottom bracket width of 86,5mm and 41mm diameter.
Shimano XTR M9000 series (BB94-41A) cups bearings for PressFit Shimano bottom brackets. Compatible with all the Hollowtech II from Shimano or Race Face X-Type cranks (24mm spindle). For frames with bottom bracket width of 89,5 or 92mm and 41mm diameter.