Viewed products
2 tubeless schrader valves mechanised...
Tool to assembly and disassembly the...
1979-0
KA2817-333
2 tubeless schrader valves mechanised in brass, 2 caps, 2 nuts a valve cap to disassemble and replace the valve core. If the sealant stuck the valve core, it can be replaced by any schrader valve core.
Blister with 2 tubeless schrader valves mechanised in brass, 2 caps, 2 nuts a valve cap to disassemble and replace the valve core. If the sealant stuck the valve core, it can be replaced by any schrader valve core.
COMPATIBLE WITH THICK HOLE RIMS.
DETACHABLE.
NOT COMPATIBLE WITH UST TUBELESS RIMS FROM MAVIC.
NOT COMPATIBLE WITH OUTER THICK HOLE AND INTERNAL THIN HOLE RIMS (EXCEPT ENLARGING).
NOT COMPATIBLE WITH ROAD RIMS.
Recommended product: With no doubt, the best valve for converted rims. More robust than the thin one as the valve core can not break. It allows more air to cross and therefore is easier to heel the tyre. It can be used with the gas station compressor without adaptors. The valve core can be changed as in the thin ones. The valve cap included can be used to disassemble it and can be brought nuted as a cap. Do you need more reasons?
Valve | Schrader / AV |