Viewed products
With this Zefal Z Liner antipuncture...
Brose control connectors (display,...
2488-0
PR137019
With this Zefal Z Liner antipuncture bands for bicycle wheels you will avoid almost every punctures. This anti puncture bands has a width of 50mm, and a length of 2250mm, enough for two 26, 27.5 or 29 wheels.
With this Zefal Z Liner antipuncture bands for bicycle wheels you will avoid almost every punctures. This anti puncture bands has a width of 50mm, and a length of 2250mm, enough for two 26, 27.5 or 29 wheels.
The Z Liner is a protective tape made out of highly resistant polyurethane material and provides additional protection against the risk of getting a puncture. The Z Liner is positioned between the inner tube and the tyre to prevent getting a flat tyre.
1- Installation is done when fitting the tyre.
2- Rest the tyre flat on a table.
3- Mount the inner tube by starting with the valve. Carefully inflate until it falls into place.
4- Slide the Z Liner between the inner tube and the tyre.
5- Roll out the Z Liner and insert it opposite the valve.
6- Cut the tape with a pair of scissors being careful to leave a 2 cm gap between the two strips which will help stop the tapes overlapping and pinching the inner tube. A squashed inner tube is more likely to puncture.
7- Check the Z Liner is in the correct position before adding the rest of the tyre and inflating it to the right pressure.
Weight: 2x135gr.