Product successfully added to your shopping cart
There are 0 items in your cart. There is 1 item in your cart.
Categories
Catalog
-
Hutchinson Toro XC 29x2.30 TLR folding tire34,95 € 39,95 €
Maintenance There are 267 products.
7,95 €Kroon Compound OGL spray 400ml
Kroon Compound OGL is used as a lubricant for heavy-duty open gears and chains. Compound OGL is a special compound formulated from highly refined mineral base oils with solvents. It is supplemented with special Bitumen 'Extreme Pressure' and wear-reducing molybdenum additives. Excellent penetrative ability, adhesion to metals and water-resistance.
7,95 €
29,90 € 39,90 € -26%Mousse ROTO Hot Dogs Performance 29"
Latest generation mousse for tubeless tires. The design of the ROTO Hot Dogs with central channel makes it lighter and provides better performance. Protects against impacts to the rim and allows ride with less pressure. It does not absorb the sealant and is mounted in less than 5 minutes.
For 29 wheels from 45 to 55mm width.
29,90 € 39,90 € -26%Reduced price!
5,95 €DOT-5.1 BikeWorkx Fluid for hidraulic brakes (SRAM, Formula, Avid,...) 100ml
Fluid DOT 5.1 for hidraulic brakes (SRAM, Formula, Avid,...). BikeWorkx DOT 5.1 is a brake fluid for hydraulic brake and clutch systems with a boiling point of at least 260 °C and an extremely high wet boiling point of at least 180 °C. The low viscosity at low temperatures allow an easy bleeding procedure. 100ml.
5,95 €
from 9,90 € 10,90 € -10%WTB Tubeless tape 11 meters 24mm / 26mm / 28mm
This WTB tubeless tape allows to seal rims and convert them in tubeless, without any other kind of tape or rubber sash, with only 1 lap and adding only 6-7 gr per wheel. Available in lots of widths for all rims. 11 meters.
from 9,90 € 10,90 € -10%Reduced price!
19,90 €Yamaha Multemp AC-N grease for plastic & metal
Yamaha Multemp AC-N is a high quality Japanese manufactured grease by KYODO YUSHI. Specifically designed for lubrication of metal and plastics, like the gears found in many ebike motors. Suitable for long term lubrication. 50ml.
19,90 €
5,90 €Self adhesive patches for TPU tubes (6un)
Bicycle patch kit with 6 patches. With the self-adhesive patches from Schwalbe, a hole in a TPU tube can be repaired quickly and easily. The patches have been specially developed for repairing TPU tubes. Never forget your patch kit when you ride.
5,90 €
19,90 €Hylomar H motor liquid gasket
Hylomar H is a highly engineered, non-setting and non-hardening jointing compound. The compound is resistant to a wide range of fluids. It can be used to seal motors, including ebike motors.
19,90 €
from 6,90 €Nitrile gloves 100pcs box
Box of 100pcs (50 pairs) of nitrile gloves. The nitrile gloves are ideal to work with greases and dirt, like in your garage repairing a bike.
from 6,90 €
4,95 €Protexa Microparticles Hand Cleaning Paste 500g
Protexa hand cleaning paste for thorough and gentle hand cleaning. The microparticles even removes stubborn soiling such as paint, oil and brake dust. Gentle on the skin and sparing in consumption. Dermatological tested. Thoroughly rub into dry hands and rinse off. 500gr.
4,95 €
from 2,50 €X-REDNITRON Work gloves
X-REDNITRON are work gloves made of polyester with the palm coated with nitrile. It is a very durable and comfortable product to use. They are perfect for places where substances such as grease, oil, solvents are present. The nitrile contained in the gloves increases resistance. They are also resistant to mechanical use, including abrasion, cutting, puncture and tearing. Price per pair.
from 2,50 €
39,90 €Cannondale Lefty 8 needle bearings kit
Cannondale Lefty OCHO needle bearings kit to repair your fork. If you have the bearings of your Cannondale Lefty 8 wasted or damaged you can replace them with this needle bearings kit.
39,90 €
64,90 €Trek BB90/BB95 ceramic bearings for Shimano cranks
Trek BB90/BB95 bottom bracket hybrid ceramic bearings with caps. For use with Shimano cranks (24mm spindle). Made by Tripeak with high quality ceramic balls. "Snug fit" with plastic cover to adapt better to the bottom bracket form. Price per pair of bearings and caps.
64,90 €
from 9,95 €Yamaha PW-ST, PW-TE, PW-CE bearings
Bearings kits, or individual bearings, for Yamaha PW-ST, PW-TE, PW-CE and equivalent Giant SyncDrive Sport ebike motors. Contains the needed bearings to make the maintenance to the main bearings of your Yahama ebike motor. Include 2 or 6 bearings, 1 seal and 2 o-rings.
NOTE: kit for Yamaha motors with squared spindle (not ISIS). For ISIS type spindle go to Yamaha PW-X or X2.
from 9,95 €
from 7,90 €Shimano EP8 motor bearings
Shimano EP8 ebike motor bearings to repair any Shimano EP8 electric motor. See the photos to see the bearings included in the Shimano EP8 kit.
from 7,90 €
23,90 €Trek BB90/BB95 bearings for Shimano cranks
Trek BB90/BB95 bottom bracket steel bearings with caps. For use with Shimano cranks (24mm spindle). Made by Tripeak with high quality bearings. Price per pair of bearings and caps.
23,90 €
124,90 €Impulse EVO & EVO RS ebike motor bearings
Bearings overhaul kit for Impulse EVO & EVO RS ebike motors. Contains the needed bearings to replace the main bearings of your Impulse EVO & EVO RS ebike motor.
124,90 €
119,90 €Impulse 2.0 ebike motor bearings
Bearings overhaul kit for Impulse 2.0 ebike motors. Contains the needed bearings to make the full maintenance to the main bearings of your Impulse 2.0 ebike motor.
119,90 €
from 1,90 €Bosch Gen4 ebike motor bearings
Bearings for Bosch 4 ebike motors both normal and Smart System,(ie. the Performance Line CX). The Bosch Gen4 motors has motor code starting with BDU4 and the Gen4 Smart System starting with BDU37xx, BDU38xx,....). With this bearings you can make the maintenance to your Bosch of 4th generation ebike motor. Select the needed bearing or the Full Kit option.
from 1,90 €
from 1,90 €Bosch 3 ebike motor bearings (BDU3XX)
Different bearing kits for Bosch Gen3 ebike motors (motor code with the format BDU3xx). With this bearings you can make the maintenance to your Bosch of 3th generation ebike motor. Select the bearing that you need or the Full Kit.
from 1,90 €
from 7,50 €Shimano E8000 motor bearings
Shimano E8000 ebike motor bearings to repair any Shimano E8000 electric motor. See the photos and below description to see what reference you need. Select the bearing you need or "Full kit" for all (each option has a different price).
from 7,50 €
24,90 €Cannondale Lefty integrated steerer bearing
Integrated steerer sealed bearing for the Cannondale Lefty forks. Bearing size: 39,7x50,8x7mm.
Price per unit.
24,90 €
from 7,50 €Bosch 2 ebike motor bearings
Different bearings and bearings kits for Bosch 2 ebike motors (Active, Performance, Performance CX). With this bearings you can make the maintenance to your Bosch of 2nd generation (BDU2XX) ebike motor. See the description below and the photos to know each bearing reference.
In the "Bearing" field select the bearing you need.
from 7,50 €
109,95 €Panasonic ebike motor bearings
Bearings overhaul kit for Panasonic ebike motors. Contains the needed bearings to make the full maintenance to the main bearings of your Panasonic ebike motor.
109,95 €
from 9,50 €Giant SyncDrive Pro and Yamaha PW-X & X2 ebike motor bearings
Crankshaft bearings kits for Yamaha PW-X, PW-X2 and Giant Syncdrive Pro ebike motors. Contains the needed bearings to make the maintenance to the main bearings of your Yahama ebike motor. Include 2 or 4 bearings and 2 o-rings.
NOTE: for motors made by Yamaha with ISIS crankshafts (not squared). For squared spindle go to PW & PW-SE product.
from 9,50 €