Catalog
Viewed products
The Watch Speedlifter Ahead is the...
Tool for tighten or loosen the Shimano Hollowtech II bottom brackets. With this tool you can make the maintenance of the bottom bracket. It can be uset to tighten some centerlock discs, and as extension for other tools.
Bike Workx MTB tubeless Kit for two 29 inches wheels that includes rim tape of 25mm width for 2 wheels, 2 Presta valves, 2x125 ml sealant, presta valve tool. Special tubeless valves with conical plug seals and a sealed lock nut combined with our new super-strong tubeless rim tape and our race-proven “Super Sealer” tyre sealant.
Tool to change shock bushings for Rock Shox, FOX, Marzocchi, Suntour... and any other that have 12,7 or 12mm bushings. The bushings of the shocks must be changed when you see some looseness.
XLC S28 Chain tool to open and close all kinds of bike chains, including the last 11 speed and 12 speed chains. Its small format will allow you to take it in your backpack or bag of tools if you have a problem on route with your chain.
Torx tool set with the most common bike sizes: T10, T15, T20, T25, T27, T30, T40. Made in Chrome-Vanadium (CR-V) alloy for maximum hardness.
The Tannus Armor is a puncture protector sandwiched between the inner tube and the MTB bike tire, providing complete protection against punctures and side cuts. It is strong, light, flexible and incredibly durable (+ 7,000km). It allows riding at very low pressures, thus increasing the grip, reducing vibrations and increasing overall performance.
Latest generation mousse for tubeless tires. The unique design of the Tannus Armour with side wings makes it lighter and provides better performance. Protects against impacts to the rim and allows ride with less pressure. It does not absorb the sealant and is mounted in less than 5 minutes.
Torque wrench calibrated to 0.2Nm of torque. Allows use of 1/4 inch bits with C 6.3 or E 6.3 shank. With magnet for the correct attachment of the tips.
The value of 0.2Nm of torque is fixed, it cannot be adjusted.
Long-term grease for bicycles (FETT 2000). Fluorescentyellow calcium-based grease with durable lubricating properties. MOTOREX BIKE GREASE 2000 is a highly water-repellent, extremely pressure-resistant grease. Provides enhanced resistance to oxidation and aging. Ideal for lubricating bearings, hubs, joints and headset. Carbon tested. 850gr.
Vaseline grease to lubricate all type of components. Avoids corrosion, and doesn't has resins ans is not acid. Temperature range from -20 to +130ºC.
M-Wave torque wrench for tightening from 3Nm to 10 Nm. Very cheap thanks to its simple system that shows you how much you are tightening by bending. Simple but very practical for use on the bike.
Tool for loosening or tightening the top caps of the SR Suntour fork legs. Available in two diameters depending on the fork model (24mm-10 notches or 29mm-12 notches).
MoS2 (or Molybdenum disulfide) powder is a solid lubricant that lubricates metal surfaces in many difficult and extreme environments (e.g., metal/metal pairings at extreme loads and slow speeds, or metal/plastic pairings at low loads and low to medium speeds). Made by Dupont in 3 microns size. 20g bag.
Complete 14 function bike folding tool, with the most used bike sizes tools (allen, torx, screwdrivers, brake pad opener, tire lever,...). Ideal to solve any problem you have on route. The SKS TOM 14 in made of high quality chrome-vanadium steel. Very compact, weights only 129gr.
The XLC M05 is one of the most complete 19 function bike folding tool, with the most used bike sizes tools (allen, torx, screwdrivers, wrenchs) and a chain tool. Ideal to solve any problem you have on route.
Pipe cutter to cut cleanly aluminium parts like fork tube or seatpost. Max. diameter: 30mm.
1-way plastic bike pump with gauge. T handle for easy usage. Double head fits Schrader and Presta valves. High volume, ideal for MTB use. 25,5cm long. Up to 80PSI / 5.5bar.
2-way Alloy telescopic bike pump with gauge. Aluminium body, compact size and high pressure, up to 100PSI / 7bar. The head fits Schrader and Presta valves. 26,5cm long.
6 Big rectangular patches for vulcanizing with glue to repair bike inner tubes. 32x50mm size patches, enough to fix almost any puncture. Glue and other accessories not included.
12 circular patches for vulcanizing with glue to repair bike inner tubes. 25mm diameter patches, enough to fix almost any puncture. Glue and other accessories not included.
Muc-Off HCB-1 is the ultimate corrosion protection spray for your ride and is effective even in the harshest of conditions. Suitable for bicycles, e-bikes, motorcycles and powersports. HCB-1 is safe to use on electrical components, paintwork and most rigid plastic trim. Dissolves existing rust and creates a self-healing barrier, active for up to 12 months.
Muc-Off Glue & Sealant Remover with a non-aggressive proprietary formula, helps remove rim tape glue, sealant or tubular glue residue from inside rims (and many other surfaces) prior to applying a new Tubeless Rim Tape or just switching up your decals. Safe to use on most metal, plastic and carbon fibre surfaces. 200ml spray.
Headset spanner to adjust threaded headsets or big nuts of 30mm / 32mm / 36mm y 40mm.
Shimano BBR60 bottom bracket extractor. With this tool you can install and remove SM-BBR60 bottom brackets. You need a 1/2 tool to use it. Similar to TL-FC37.