Catalog
The hub cone spanner tool is a must have for all the people with traditional ball hubs (like all the Shimano hubs). The cone and balls wear makes that from time to time you need to tighten the hubs. With this tool you can tighten or loose cones of 13, 14, 15 and 16. You will need to have 2 of this tools to make the maintenance properly. Price per unit.
Red grease with teflon (PTFE 1100) for a long lasting lubrication for all the bicycle components. Everybody need to have one in the house or in the garage. 60gr or 500gr.
Kroon TEFTEC is a chain oil ideal for winter, rain days and mud, or long routes where we need a long lasting lubrication. With high quantity of Teflon (PTFE) to reduce the friction between the chain parts. 100ml.
Bag of 30 assorted patches with the most used sizes: 12 of 18mm, 12 of 24mm, and 6 of 27mm. Bike patches made by Bompar in Spain, to use with usual vulcanization glue (not included).
Forget punctures and blowouts. JOE'S puncture sealant for tubeless, tubeless ready and tubular tires, seal the tire instantly while you ride. Excellent sealing for holes up to 6mm.
With this Bompar tubeless repair kit you car repair cuts and holes that sealants can't. With a kit you can repair lots of tires. Is really fast to repair a tire, so you can do it in the middle of the mountain in less than 10 minutes.
Screw-Retainer High Strength from Liqui-Moly. Prevents unwanted screw loosening. Resistant against vibration loosening. Hardens quickly and reliably. Can be used on oiled surfaces. Seals screws, prevents leaks. Good chemical resistance. 10 g.
Liqui-Moly liquid hand cleaning paste for thorough and gentle hand cleaning. Even removes stubborn soiling such as paint, oil and brake dust. Gentle on the skin and sparing in consumption. Dermatological tested. Thoroughly rub into dry hands and rinse off. 500ml.
2 detachable tubeless presta valves with caps and nuts + presta-schrader adapter + 2 flat O-ring + 2 valve washer + wrench to open and close the valve. Rectangular base.
Tool to tighten and loosen the chainring spider in Brose engines, like in the Specilized Turbo Levo. With this key you can make the maintenance of the Brose electric motor.
Competition suspension synthetic oil with a high viscosity coefficient, specially developed to overcome the properties of the oils usually used. The RSP Damp Champ oil use the most modern technology that guarantees a soft and predictable damping effect on any road surface. It is possible to mix oil to achieve the desired performance. The oil is available in 2.5wt, 5wt, 7.5wt, 10wt and 15wt.
If you want the best softness in your fork or shock you should use RSP AirFluid. The RSP Air Fluid is a special oil of high lubricating power for the air chambers and bottles of the suspensions (not for the hydraulic circuit). Valid for all market forks (FOX, Rock Shox, Marzocchi,...). Similar to FOX 20wt Gold or RockShox 0-30W but improved by RSP. 250ml.
The RSP NoStickSlip is an anti-friction additive without solid particles, completely soluble in oil. Reduces friction and wear. The R.S.P. NoStickSlip greatly increases the softness of the forks and shocks. Reduction of operating temperatures. The standard doses are from 3% to 5% (30-50 ml per liter) in the oil of your fork or shock. 50ml.
Unthreaded 16g CO2 cartridges to inflate your wheels instantly. With these 16 gram CO2 cartridges you can inflate both wheels of mountain bikes as road bikes. Compatible with any pump and adapter that accept unthreaded CO2 cartridges. Price per cartridge.
Carbocut is a revolutionary hacksaw specifically designed for the bicycle world – it’s the best possible tool you can have for cutting hard materials (ceramics, steel, titanium...) and it simply shines when it comes to working with composite tubes and parts. Size: 24,8cm between holes. Price per blade.
Spiro is a revolutionary chain cleaner that you can store in any place. The hard brushes in all directions of Spiro, clean the chain better than others chain cleaners.
Tool to change shock bushings for Rock Shox, FOX, Marzocchi,... and any other that have 0,5"x0,5" (12,7x12,7mm) bushings. The bushings of the shocks must be changed when you see some looseness.
With this head for CO2 cartridges you can connect your threaded cartridges to the presta valve. In aluminum to last forever. Possibility of opening and closing the air flow just by turning it.
With this brush for sprays and lubricant cans you can apply more evenly and clean the oil to the chain. The oil comes out through the brush hairs gently, while the brush lubricates the entire width of the chain. For sprays and cans of 6mm wide and short nozzle, or 3mm long nozzle.
This XLC TO-S06 tool is meant to extract the BB30, Pressfit30, BB386 inner bearings and cups (Ø 30mm inner diameter) from the frame. The use of this tool in this process is strongly recommended in order not to cause damage to the frame.
The XLC TO-M20 multitool has almost everything you need to solve any breakdown you have on your bike on route. Made of hardened steel with nickel-plated anticorrosive coating. This bicycle multitool has a compact size and low weight.
With this tubeless repair spray you can repair quickly punctures in tubeless tyres and tubes. This spray inflate your tire and introduce tire sealant. Once applied you must ride to block the puncture. Valid for presta and schrader valve. 75ml, 100ml, 125ml or 150ml.
Exus grease gun to use with the Exus grease cartridges. Made of steel for long lasting. This grease gun lets aply easily the grease in the bike.
CO2 Cartridge pump with telescopic pump, to always have an inflation solution. The Zefal EZ Max Light has an aluminium head for presta and schrader valves.