Catalog
Viewed products
Ahead steerer cup for 1 1/8". Ideal...
With these pliers you can change the chain quickly. These pliers allow you to open and then close the quick-closing links of SRAM or KMC chains for example.
Valve core for removable core tubeless valves for bicycles. You can replace an obstructed valve core easily and continue using the valve without removing all the tire. Compatible with presta removable tubeless valves.
With this tool you can adjust easily the space between the jockey puller and the cassette for SRAM XX1, X01 and GX rear derailleurs.
Cannondale Lefty wheels adapter for wheel truings. Now you can easily center your Lefty wheel in any wheel truing. Compatible with 50 and 60 lefty hubs.
Tool for the upper hydraulic cartridge cup of the Cannondale Lefty 2.0 fork. With this "Leo Touter" tool you can make the proper maintenance of the damper of your Lefty 2.0 fork.
Cod. Cannondale: KH127
This XSauce tape allows to seal rims and convert them in tubeless, without any other kind of tape or rubber sash, with only 1 lap and adding only 6-7 gr per wheel. Available in lots of widths for all rims. 9 meters.
2 Detachable tubeless presta valves with caps and nuts + wrench to remove the valve core. Made of aluninium this tubeless valves are very light, only 4gr each. Anodized red color. 44mm length and cone base.
Hub bearings extractor to remove cartridge bearings with an inner race ID of 10-25 millimeters. A large screwdriver can be used as a punch from the opposite side (blade placed in the "fold" of the tool).
Lever connector replacement for pumps and compressors. For AV valves (car/motorbike). Metal body and lever for high durability.
Connector replacement for pumps and compressors. For presta valves (bicycle). Metal body for high durability.
Fast connector replacement for pumps and compressors. For AV valves (car/motorbike). Metal body and lever for high durability.
Torx tool set with the most common bike sizes: T10, T15, T20, T25, T27, T30, T40, T45, T50. Made in Chrome-Vanadium (CR-V) alloy for maximum hardness. In diferent colors for fast identification.
Tool to remove the the chainring in the new Shimano 12s cranks (XTR, XT and SLX). With this tool you can change the chainring in your Shiamno cranks. Compatible with:
FC-M9100/FC-M9120/FC-MT900/FC-M8100/FC-M8120/FC-M8130/FC-M7100/FC-M7120/FC-M7130
SRAM special grease for all kind of ceramic or hybrid ceramic bearings. A small amount of grease is needed to keep the ceramic bearings rolling fast and without wear. 10ml.
The Airwave Motion mini pump features track pump performance in a portable package. The high volume 6063 aluminium barrel will provide more air per stroke than normal mini-pumps and the flip out foot stirrup and T-handle will provide track pump stability for fast, efficient tyre inflation.
Schrader valve tool for bicycles, motorbikes, cars, etc... With this valve tool you can disassemble the valve core and rectify the valve threads.
If you have a presta only pump you can use this adapter to inflate schrader valve tyres.
Shimano XTR - Dura Ace bottom bracket extractor TL-FC34. With this tool you can install and remove SM-BB9000, BB93, BB-R9100 bottom brackets.
Tool to assembly and disassembly the external cap of the Cannondale Lefty hub.
Ultra compact and safe capsule system for tubless repair. Ideal to repair holes that sealant liquid can't seal. Stainless steel needle where you can preload a seal strip. You just need to nail the punch, take it out and roll so that the sealing liquid has just sealed the puncture.
10 seal stript to use with the Ryder SlugPlug. A compact box that includes 5 seal strips of 3.5mm, and other 5 of 1.5mm. Ideal to repair holes that sealant liquid can't seal.
The Zefal Extra Dry Chain Lube excels in dry and dusty environments. It's wax formula keeps the chain dry, so prevents dust and sand from sticking. It’s ideal for drive chain.
15 seal strips of 4.5mm width to repair tubeless tyres. A box that includes 15 seal strips of 4.5mm. Ideal to repair holes that sealant liquid can't seal.
Smuums concentrated soap for bicycles is respectful to all parts of the bike (frame, disks and brake pads ...). You only need to use 3ml of soap for each 1 liter of water.